{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Precision revolving lathe centre with extended point, very large ⌀ / Morse taper: 86/5
Article no.: 321360 86/5
Article code:
Product details
Technical Data
| smallest ⌀ d | 19 mm | |
| reduced head length L1 | 93.5 mm | |
| Head length L | 121.5 mm | |
| maximum radial run-out | 0.005 mm | |
| maximum speed | 3,200 min-1 | |
| for workpiece weight | 550 kg | |
| Taper angle a | 60 degrees | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 321360 86/5 | |
| EAN / GTIN | 4045197882417 | |
| Manufacturer number | 321360 86/5 |
Description
Version:
- Tool fully hardened and ground.
- Bearings designed to take high axial forces.
- Maintenance-free greased for life.
- Shaft seal prevents ingress of dirt and cooling fluids.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
- Combi tool for standard centring and machining pipes.
- Perfect all-purpose tip for general use on manual and CNC machines.