{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving lathe centre 60° / 30° 5
Article no.: 321260 5
Article code:
Click to enlarge image
Click to enlarge image
Extended point for unobstructed access to the turning tool.
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Morse taper | MK5 | |
| Body ⌀ D | 72 mm | |
| Reach B | 146 mm | |
| largest centre point ⌀ 60° A | 10 mm | |
| largest centre point ⌀ 30° A | 35 mm | |
| maximum radial run-out | 0.003 mm | |
| Centre point length C | 53 mm | |
| maximum speed | 8,000 min-1 | |
| for workpiece weight | 2,000 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 321260 5 | |
| EAN / GTIN | 4045197774408 | |
| Manufacturer number | 321260 5 |
Description
Version:
Point angle 60°/30°
- With extended centre and draw-off nut, specially for CNC machines.
- Complete tool hardened and ground.
- Special roller bearings for high loads and speeds.
- Live centre through hardened, can be reground many times.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For high loads and speeds, specially for NC machines.
Extended point allows unobstructed access for the turning tool on the end face of the component. Particularly suitable for copy turning.
Extended point allows unobstructed access for the turning tool on the end face of the component. Particularly suitable for copy turning.
Note:
Draw-off nut for NC machines to remove tip from tailstock sleeve.