{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Standard: DIN 6499 D
- Balance quality G at rotational speed: G 6.3 at 15,000 rpm
Product details
Technical Data
| for ER | 40 mm | |
| Standard | DIN 6499 D | |
| Balance quality G at rotational speed | G 6.3 at 15,000 rpm | |
| Overall length L | 26 mm | |
| External ⌀ D | 63 mm | |
| Thread | M50×1.5 | |
| maximum tightening torque | 240 Nm | |
| Type of product | Clamping nut |
Identification numbers & Classifications
| Article number | 309580 40 | |
| EAN / GTIN | 4045197151971 | |
| Manufacturer number | 309580 40 |
Description
Version:
Thread and taper ground in a single setup for highest concentricity.
With slots.
Suitable for:
All standard ER collet chucks.
Optional extras:
ER clamping wrench, No. 309680 − 309740.
Single open ended spanner (for size 16), No. 613300 size 25.
Single open ended spanner (for size 16), No. 613300 size 25.
Note:
Collet chuck and clamping nut are balanced separately!
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
ER clamping nut 40
on request
In stock
60 pieces in stock
€37.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
€57.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
€98.21
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
€34.27
plus VAT at the current rate
Prices plus delivery costs
|
|
| External ⌀ D | 63 | 63 | 63 | 50 |
| for ER | 40 | 40 | 40 | 40 |
| Overall length L | 26 | 26 | 26 | 20 |
| Thread | M50×1.5 | M50×1.5 | M50×1.5 | M50×1.5 |
| maximum tightening torque | 240 | 240 | 240 | 120 |
| Standard | DIN 6499 D | DIN 6499 D | DIN 6499 D | DIN 6499 D |
| Type of product | Clamping nut | Clamping nut | Clamping nut | Clamping nut |