{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KOMET KUB Quatron® indexable drill Combination shank 37 mm
Article no.: 235502 37
Article code:
- Drill depth for indexable insert drill up to: 3×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Product details
Technical Data
| Series | KUB Quatron® | |
| Nominal ⌀ D | 37 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 111 mm | |
| Overhang LA | 150 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| ISO code indexable insert | SOEX 120508 44-.. | |
| Pack of insert screws | 239652 20IP (6.3 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 210 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 235502 37 | |
| EAN / GTIN | 4047109026483 | |
| Manufacturer number | U11 83700 |
Description
Version:
With combination shank.
- Optimised coolant channels for reliable chip evacuation.
- Point angle 174° for almost flat-bottomed holes.
Application:
- For stationary and rotating use.
- For difficult drilling conditions (rolling scale, sloping surfaces of castings, interrupted cutting).
- For bores with tolerance ± 0.2 mm.
With indexable inserts No. 236520 − 236576.
Supplied with:
Clamp screws (without indexable inserts).
Note:
Further sizes available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
KOMET KUB Quatron® indexable drill Combination shank 37 mm
on request
In stock
2 pieces in stock
€ 663,55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
354,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
418,60 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Poran käyttö | Centre drilling ;limited cross-drilling ;oblique spot drilling ;Cross-drilling ;Centre drilling ;Aperture ;oblique exit ;convex | Keskiöporaus ;viistoporaus ;rajoitetusti poikittaisporaus ;Päällekkäinporaus ;Viisto ulostulo ;Viistoporaus | Keskiöporaus ;viistoporaus ;rajoitetusti poikittaisporaus ;Päällekkäinporaus ;Viisto ulostulo ;Viistoporaus |
| ISO-koodi-kääntöterä | SOEX 120508 44-.. | WOEX 06T304 | WOEX 06T304 |
| Nimellis-⌀ D | 37 | 37 | 37 |
| Varren pituus Ls | 60 | 60 | 60 |
| Kääntöterä-ruuvisarja | 239652 20IP (6.3 Nm) | 239700 10IP (2,8 Nm) | 239700 10IP (2,8 Nm) |
| Tuotetyyppi | Indexable drill | Kääntöteräpora | Kääntöteräpora |
| Ulkonema LA | 150 | 113 | 150 |