{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC17, with bore, ⌀ D / number of teeth Z: 80/6mm
Article no.: 227510 80/6
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 80 mm | |
| Number of cutting edges Z | 6 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 15.7 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 27 mm | |
| ⌀ D3 | 73 mm | |
| Circular interpolation milling ⌀ Dmin | 153 mm | |
| Circular interpolation milling ⌀ Dmax | 158 mm | |
| Ramping angle αmax | 0.2 degrees | |
| Ramping length L for αmax | 71.6 mm | |
| suitable indexable insert | BDMT 170408 | |
| Insert screw | 229709 (T15; 3.5 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227510 80/6 | |
| EAN / GTIN | 4960664456697 | |
| Manufacturer number | THN03429 |
Description
Version:
Long cutting edges permit exceptionally large cutting depths.
Small number of cutting edges.
Small number of cutting edges.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Indexable milling cutter 90° MEC17, with bore, ⌀ D / number of teeth Z: 80/6mm
on request
In stock
1 pieces in stock
€695.42
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1 pieces in stock
€897.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
€576.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3 pieces in stock
€616.40
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 6 | 5 | 7 | 5 |
| Milling application | Circular milling; Ramping; End milling | End milling | End milling | Ramping; Circular milling; Plunging |
| Overall length Ltot | 50 mm | 50 mm | 50 mm | 50 mm |
| Through-coolant | yes | yes | yes | yes |
| Shank type | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 80 mm | 80 mm | 80 mm | 80 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |