{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC17, with bore, ⌀ D / number of teeth Z: 160/12mm
Article no.: 227510 160/12
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 160 mm | |
| Number of cutting edges Z | 12 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 15.7 mm | |
| Overall length Ltot | 63 mm | |
| Mounting bore ⌀ | 40 mm | |
| ⌀ D3 | 153 mm | |
| Circular interpolation milling ⌀ Dmin | 313 mm | |
| Circular interpolation milling ⌀ Dmax | 318 mm | |
| Ramping angle αmax | 0.09 degrees | |
| Ramping length L for αmax | 151.6 mm | |
| suitable indexable insert | BDMT 170408 | |
| Insert screw | 229709 (T15; 3.5 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227510 160/12 | |
| EAN / GTIN | 4960664473182 | |
| Manufacturer number | THN03461 |
Description
Version:
Long cutting edges permit exceptionally large cutting depths.
Small number of cutting edges.
Small number of cutting edges.
Note:
Without internal cooling.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Indexable milling cutter 90° MEC17, with bore, ⌀ D / number of teeth Z: 160/12mm
on request
Available in 3-4 weeks
0 pieces in stock
€1,418.48
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
€1,274.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
€1,527.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€1,099.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
€1,012.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 12 | 10 | 14 | 10 | 10 |
| Milling application | Circular milling; Ramping; End milling | End milling | End milling | Corner milling; Circular milling; Ramping | End milling |
| Overall length Ltot | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm |
| Through-coolant | yes | yes | yes | yes | yes |
| Shank type | with bore | with bore | with bore | with bore | with bore |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |