{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC11T, Weldon shank, ⌀ D / number of teeth Z: 25/3mm
Article no.: 227305 25/3
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 10 mm | |
| Overhang L1 | 32 mm | |
| Overall length Ltot | 88 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| ⌀ D3 | 19 mm | |
| Circular interpolation milling ⌀ Dmin | 44 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 0.64 degrees | |
| Ramping length L for αmax | 18 mm | |
| suitable indexable insert | BD.. 11T3 | |
| Insert screw | 229708 (T8; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227305 25/3 | |
| EAN / GTIN | 4960664406579 | |
| Manufacturer number | THN63183 |
Description
Description:
MEC11T mill type with higher stability due to lower number of cutters than MECX. This enables higher feed rates per cutter.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Indexable milling cutter 90° MEC11T, Weldon shank, ⌀ D / number of teeth Z: 25/3mm
on request
In stock
8 pieces in stock
318,02 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
351,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
39 pieces in stock
328,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 32 mm | 49 mm | 49 mm |
| Overall length Ltot | 88 mm | 105 mm | 105 mm |
| Through-coolant | yes | yes | yes |
| Shank type | Weldon shank | Weldon shank | Weldon shank |
| ⌀ D3 | 19 mm | 22 mm | 22 mm |
| Ramping length L for αmax | 18 mm | 19.5 mm | 19.85 mm |
| Type of product | End / face mill | End / face mill | End / face mill |