{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC11T 20/3 mm
Article no.: 227300 20/3
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 10 mm | |
| Overhang L1 | 30 mm | |
| Overall length Ltot | 110 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| ⌀ D3 | 14 mm | |
| Circular interpolation milling ⌀ Dmin | 34 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Ramping angle αmax | 0.88 degrees | |
| Ramping length L for αmax | 13 mm | |
| suitable indexable insert | BD.. 11T3 | |
| Insert screw | 229708 (T8; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227300 20/3 | |
| EAN / GTIN | 4960664396078 | |
| Manufacturer number | THN03167 |
Description
Description:
MEC11T mill type with higher stability due to lower number of cutters than MECX. This enables higher feed rates per cutter.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Indexable milling cutter 90° MEC11T 20/3 mm
on request
In stock
9 pieces in stock
€289.57
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
€304.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
€387.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
€349.60
plus VAT at the current rate
Prices plus delivery costs
|
|
| Through-coolant | yes | yes | yes | yes |
| suitable indexable insert | BD.. 11T3 | AP.. 1335.. | LO.U0904.. | XNEX 040308 |
| Shank type | Plain shank | Plain shank | Plain shank | Plain shank |
| Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Shank ⌀ Ds h6 | 20 mm | 16 mm | 20 mm | 20 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |