{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 222079 14
Indexable insert for milling SOMT....20ER-LD, for high feed rate indexable face mills, PR1525, Type: 14
Article no.: 222078 14
Article code:
Product details
Technical Data
| ISO code indexable insert | SOMT140520ER-LD | |
| Type | ST1400 | |
| Corner radius | 2 mm | |
| Grade | PR1525 | |
| Tool material | Carbide | |
| Programming radius at ap max | 5 mm | |
| Feed fz per tooth | 0.03 − 2 mm | |
| Number of changes/inserts | 4 | |
| Indexable insert size | 14 | |
| Insert thickness E | 5.56 mm | |
| Type of product | Indexable insert for milling |
Identification & Classification
| Article number | 222078 14 | |
| EAN / GTIN | 4960664708185 | |
| Manufacturer number | TLB05628 | |
| Manufacturer | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 NEUSS, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
160
P
140
P
100
Description
Version:
4-edge indexable inserts with convex cutting edges for low cutting forces.
Application:
LD geometry is also suitable for high cutting depths (ap max= 5 mm) at moderate feed rates.
Do not use for helical, plunging or contour milling, or on steep walls.
Do not use for helical, plunging or contour milling, or on steep walls.
Note:
Standard application values for ae = 0.3×D.