{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH Harrier 80/7 mm
Article no.: 222065 80/7
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 80 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Milling application | Circular milling; Plunging; Ramping | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 63 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overall length Ltot | 63 mm | |
| Mounting bore ⌀ | 27 mm | |
| Circular interpolation milling ⌀ Dmin | 143 mm | |
| Circular interpolation milling ⌀ Dmax | 158 mm | |
| Ramping angle αmax | 0.33 degrees | |
| Ramping length L for αmax | 62.4 mm | |
| Indexable insert size | 10 | |
| suitable indexable insert | SOMT.. | |
| Insert screw | 229718 (15IP; 3.5 Nm) | |
| Setting angle κ | 10 degrees | |
| Fz Helix | 0.7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222065 80/7 | |
| EAN / GTIN | 4960664707683 | |
| Manufacturer number | THN07676 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
High feed rate milling cutter MFH Harrier 80/7 mm
on request
In stock
11 pieces in stock
€725.08
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
€446.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
€571.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
€446.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
€545.10
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 7 | 7 | 7 | 7 | 7 |
| Mounting bore ⌀ | 27 | 27 | 32 | 27 | 27 |
| Milling application | Circular milling ;Plunging ;Ramping | Circular milling ;Ramping | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping | Circular milling ;Circular milling |
| Overall length Ltot | 63 | 50 | 50 | 50 | 50 |
| suitable indexable insert | SOMT.. | RD..12T3 | XD.. 09T308 | RD..12T3 | RPK.1204M0T |
| Shank type | with bore | with bore | with bore | with bore | with bore |
| Fz Helix | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 |