{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 2 | |
Shank type | with threaded shank | |
Milling application | Circular milling; Plunging; Ramping | |
Machining strategy | HPC | |
Through-coolant | yes | |
⌀ D3 | 8 mm | |
maximum cutting depth ap max | 1.5 mm | |
maximum cutting depth ap max for LD geometry | 3.5 mm | |
Overall length Ltot | 35 mm | |
Mounting thread M | M12 | |
Circular interpolation milling ⌀ Dmin | 33 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Ramping angle αmax | 2.79 degrees | |
Ramping length L for αmax | 7.4 mm | |
suitable indexable insert | SOMT.. | |
Indexable insert size | 10 | |
Insert screw | 229717 (15IP; 3.5 Nm) | |
Type of product | Copy mill |
Article number | 222060 25/2 | |
EAN / GTIN | 4960664712458 | |
Manufacturer number | THN07550 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
High feed rate milling cutter MFH Harrier, with threaded shank, ⌀ D / number of teeth Z: 25/2mm
on request
In stock
3 pieces in stock
€296.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
40 pieces in stock
€312.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
€297.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
€240.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
€364.55
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 3 | 3 | 3 | 3 |
Milling application | Circular milling; Plunging; Ramping | Circular milling; Circular milling; Ramping | End milling; Circular milling; Ramping | End milling | Corner milling |
Overall length Ltot | 35 mm | 35 mm | 35 mm | 35 mm | 30 mm |
Through-coolant | yes | yes | yes | yes | yes |
suitable indexable insert | SOMT.. | AP.. 1335.. | AP.. 1003 | SO.. 0836.. | LO.U0904.. |
Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |