{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 20 mm | |
Number of cutting edges Z | 3 | |
Shank type | with threaded shank | |
Setting angle κ | 90 degrees | |
Milling application | End milling; Circular milling; Ramping | |
Through-coolant | yes | |
Machining strategy | MTC | |
Tool exchange | PowerCard | |
Overall length Ltot | 30 mm | |
⌀ D1 h6 | 10.5 mm | |
⌀ D2 | 17.7 mm | |
Mounting thread M | M10 | |
⌀ D3 | 17 mm | |
Circular interpolation milling ⌀ Dmin | 37 mm | |
Circular interpolation milling ⌀ Dmax | 38 mm | |
Ramping angle αmax | 0.96 degrees | |
Ramping length L for αmax | 14.85 mm | |
suitable indexable insert | AP.. 1003 | |
Pack of insert screws | 219814 (8IP; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 215870 20/3 | |
EAN / GTIN | 4045197193056 | |
Manufacturer number | 215870 20/3 |
This article |
Recommendations |
|||
---|---|---|---|---|
Shoulder mill 90°, with threaded shank, ⌀ D / number of teeth Z: 20/3mm
on request
In stock
42 pieces in stock
€246.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
41 pieces in stock
€255.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
€341.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
€303.60
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 3 | 3 | 3 | 3 |
Mounting thread M | M10 | M10 | M10 | M10 |
Overall length Ltot | 30 mm | 30 mm | 28 mm | 30 mm |
Through-coolant | yes | yes | yes | yes |
suitable indexable insert | AP.. 1003 | AP.. 1335.. | LO.U0904.. | XNEX 040308 |
Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm |