{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut 90° shoulder mill, with bore, ⌀ D / Zeff: 50/4mm
Article no.: 215579 50/4
Article code:
- Setting angle κ: 90
- Milling application: End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 50 mm | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Number of effective inserts Zeff | 4 | |
| Number of indexable inserts | 16 | |
| maximum cutting depth ap max | 39.5 mm | |
| Overall length Ltot | 55 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215579 50/4 | |
| EAN / GTIN | 4045197455338 | |
| Manufacturer number | 215579 50/4 |
Description
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless steels.
Spare part:
Pack of insert screws No. 219826 (8IP; 2.2 Nm).
Note:
The insert seat must be modified when using indexable inserts with a radius greater than 2 mm.
GARANT torque screwdriver TQ No. 211750 size 2.2, use bit No. 674252 size 8IP.
Not for ramping or circular plunging!
The insert pocket must be modified when using indexable inserts with a radius greater than 2 mm.
GARANT torque screwdriver TQ No. 211750 size 2.2, use bit No. 674252 size 8IP.
Not for ramping or circular plunging!
The insert pocket must be modified when using indexable inserts with a radius greater than 2 mm.