{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Softcut® | |
Cutting edge ⌀ DC | 32 mm | |
Number of cutting edges Z | 3 | |
Shank type | Plain shank | |
Setting angle κ | 90 degrees | |
Milling application | End milling; Circular milling; Ramping | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Machining strategy | MTC | |
Tool exchange | PowerCard | |
Overhang L1 | 40 mm | |
Overall length Ltot | 210 mm | |
Shank ⌀ Ds h6 | 30 mm | |
⌀ D3 | 29 mm | |
Circular interpolation milling ⌀ Dmin | 61 mm | |
Circular interpolation milling ⌀ Dmax | 62 mm | |
Circular interpolation milling ap | 1.9 mm | |
Ramping angle αmax | 0.65 degrees | |
Ramping length L for αmax | 26.5 mm | |
suitable indexable insert | AP.. 1335.. | |
Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
Type of product | End / face mill |
Article number | 215565 32/3L | |
EAN / GTIN | 4045197409072 | |
Manufacturer number | 215565 32/3L |
This article |
Recommendations |
|
---|---|---|
![]() ![]() GARANT Softcut 90° shoulder mill MTC 32/3L mm
on request
In stock
14 pieces in stock
434,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
439,30 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 3 | 3 |
Overhang L1 | 40 mm | 55 mm |
Through-coolant | yes | yes |
suitable indexable insert | AP.. 1335.. | AP.. 1003.. |
Cutting edge ⌀ DC | 32 mm | 32 mm |
Circular interpolation milling ⌀ Dmax | 62 mm | 62 mm |
Ramping angle αmax | 0.65 degrees | 0.53 degrees |