{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 80 mm | |
Number of cutting edges Z | 6 | |
Shank type | with bore | |
Milling head suitable for insert shape | round | |
Milling application | Circular milling; Ramping | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
⌀ D3 | 64 mm | |
Overall length Ltot | 50 mm | |
Mounting bore ⌀ | 27 mm | |
Circular interpolation milling ⌀ Dmin | 144 mm | |
Circular interpolation milling ⌀ Dmax | 158 mm | |
Circular interpolation milling ap | 3.5 mm | |
Ramping angle αmax | 1.07 degrees | |
Ramping length L for αmax | 59.92 mm | |
suitable indexable insert | RD..1604 | |
Pack of insert screws | 219800 (20IP; 5.7 Nm) | |
Set of retaining washers | 219955 | |
Setting angle κ | 15 – 30 degrees | |
Fz Helix | 0.7 | |
Type of product | Copy mill |
Article number | 212165 80/6 | |
EAN / GTIN | 4045197192905 | |
Manufacturer number | 212165 80/6 |
This article |
Recommendations |
||
---|---|---|---|
Copy mill 0° negative, with bore, ⌀ D / number of teeth Z: 80/6mm
on request
In stock
16 pieces in stock
€385.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
€533.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
€385.25
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 6 | 6 | 6 |
Mounting bore ⌀ | 27 mm | 32 mm | 27 mm |
Setting angle κ | 15 – 30 degrees | 12 degrees | 15 – 30 degrees |
Milling application | Circular milling; Ramping | Circular milling; Ramping; Plunging | Circular milling; Ramping |
Through-coolant | yes | yes | yes |
⌀ D3 | 64 mm | 59 mm | 64 mm |
Fz Helix | 0.7 | 0.7 | 0.7 |