{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 125 mm | |
| Number of cutting edges Z | 10 | |
| Shank type | with bore | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 113 mm | |
| Overall length Ltot | 63 mm | |
| Mounting bore ⌀ | 40 mm | |
| Circular interpolation milling ⌀ Dmin | 238 mm | |
| Circular interpolation milling ⌀ Dmax | 248 mm | |
| Circular interpolation milling ap | 2.5 mm | |
| Ramping angle αmax | 0.44 degrees | |
| Ramping length L for αmax | 109.94 mm | |
| suitable indexable insert | RD..12T3 | |
| Pack of insert screws | 219805 (15IP; 3.8 Nm) | |
| Set of retaining screws | 219807 (15IP; 3.8 Nm) | |
| Setting angle κ | 15 – 27 degrees | |
| Fz Helix | 0.7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212145 125/10 | |
| EAN / GTIN | 4045197192837 | |
| Manufacturer number | 212145 125/10 |
Description
Version:
Milling body with irregular pitch for smooth cutting.
- High axial run-out accuracy and concentricity
- Stepless repositioning as the cutting edge wears.
Attention:
Retaining screws and retaining washers should not be used for inserts with positive geometry.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Copy mill 0° negative 125/10 mm
on request
In stock
8 pieces in stock
527,85 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
26 pieces in stock
829,15 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Mounting bore ⌀ | 40 | 40 |
| Through-coolant | yes | yes |
| Shank type | with bore | with bore |
| Cutting edge ⌀ DC | 125 | 125 |
| ⌀ D3 | 113 | 113 |
| Circular interpolation milling ⌀ Dmin | 238 | 238 |
| Fz Helix | 0.7 | 0.7 |