{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel end milling head, 45° chamfer 16 mm
Article no.: 210245 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Number of cutting edges Z: 4
- Helix angle: 38
Product details
Technical Data
| Series | Master Steel | |
| Cutter ⌀ D | 16 mm | |
| Grade | HB730 | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Number of cutting edges Z | 4 | |
| Helix angle | 38 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Machining strategy | HPC | |
| Through-coolant | no | |
| Arbor size | 16 mm | |
| suitable arbor | GARANT TopCut | |
| Head length l | 20 mm | |
| Flute length L2 | 12 mm | |
| Corner chamfer width at 45° | 0.32 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.08 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.1 mm | |
| Type of product | Cutter insert for milling |
Identification numbers & Classifications
| Article number | 210245 16 | |
| EAN / GTIN | 4045197891402 | |
| Manufacturer number | 210245 16 |
Application Table
P
210
P
170
P
150
P
130
P
110
H
50
H
40
M
80
M
50
S
80
K
160
Description
Note:
Standard application values for ap max ≤ 0.5×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
GARANT Master Steel end milling head, 45° chamfer 16 mm
on request
In stock
5 pieces in stock
€156.98
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
€154.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
47 pieces in stock
€155.25
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Helix angle | 38 degrees | 38 degrees | 45 degrees |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Corner chamfer width at 45° | 0.32 mm | 0.32 mm | 0.32 mm |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling |
| Type of product | Cutter insert for milling | Cutter insert for milling | Cutter insert for milling |