{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide router cutter dragging cut medium 12 mm
Article no.: 209460 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Milling profile: staggered teeth
- Type: W
- Tolerance nominal ⌀: h10
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | uncoated | |
| Toothing grit designation | medium | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Milling profile | staggered teeth | |
| Type | W | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 6 | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | no | |
| Flute length Lc | 38 mm | |
| Corner rounding rv | 6 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Feed f for side milling in POM GF25 | 0.38 mm/rev. | |
| Feed f for side milling in PEEK CF30 | 0.24 mm/rev. | |
| Colour ring | yellow | |
| Shank tolerance | h6 | |
| Type of product | Router |
Identification numbers & Classifications
| Article number | 209460 12 | |
| EAN / GTIN | 4045197510396 | |
| Manufacturer number | 209460 12 |
Application Table
N
120
N
120
N
100
N
100
N
120
N
110
N
120
N
120
Description
Version:
High performance diamond-pattern teeth for efficient machining of fibre-reinforced composites. For slot cutting in the roughing range. The cutters have a precise radius contour in the radius area. This enables outstanding results when copy milling.