{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide barrel milling cutter, tangential form PPC, DLC, ⌀ f8 DC / R2: 6/100mm
Article no.: 207517 6/100
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.05×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | PPC | |
| Flute length Lc | 20.8 mm | |
| Effective radius R2 | 100 mm | |
| Corner radius R1 | 1 mm | |
| Overall length L | 62 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.04 mm | |
| Feed fz for copy milling in short-chipping aluminium | 0.05 mm | |
| Colour ring | yellow | |
| Type of product | Ball-nosed slot drill |
Identification & Classification
| Article number | 207517 6/100 | |
| EAN / GTIN | 4045197989017 | |
| Manufacturer number | 207517 6/100 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
330
N
300
N
230
Description
Version:
High-performance tool for exceptionally efficient finish machining of free-form surfaces. For outstanding surface qualities in a very short machining time. For use on modern 5-axis milling machines with CAD / CAM support.
The end face geometry is designed so that the chips, especially those formed by the end radius, are of optimum shape and have optimum evacuation characteristics. For this purpose the number of cutting edges is reduced to the number of effective end face cutting edges.
The end face geometry is designed so that the chips, especially those formed by the end radius, are of optimum shape and have optimum evacuation characteristics. For this purpose the number of cutting edges is reduced to the number of effective end face cutting edges.
Recommendation:
We recommend 0.05 to 0.2mm as an allowance for finishing operations.
Note:
R2 represents the effective radius on the tool.
Cannot be reground!
Cannot be reground!