{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide ball nose slot drill, TiAlN, ⌀ h10 DC: 8mm
Article no.: 207155 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 12 mm | |
| Radius R | 4 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 8 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.045 mm | |
| Feed fz for copy milling in steel < 900 N/mm2 | 0.051 mm | |
| Colour ring | without | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207155 8 | |
| EAN / GTIN | 4045197126573 | |
| Manufacturer number | 207155 8 |
Application Table
N
350
N
250
P
130
P
80
P
70
H
50
M
80
M
70
K
120
N
320
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide ball nose slot drill, TiAlN, ⌀ h10 DC: 8mm
on request
In stock
258 pieces in stock
45,66 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
93 pieces in stock
107,18 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
114,08 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
139 pieces in stock
44,05 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | red | without |
| Through-coolant | no | no | no | no |
| Radius R | 4 mm | 4 mm | 4 mm | 4 mm |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Flute length Lc | 12 mm | 12 mm | 12 mm | 12 mm |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |