{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide ball nose slot drill 6 mm
Article no.: 207155 6
Article code:
- Tool material: Solid carbide
- Norm: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Norm | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 10 mm | |
| Radius R | 3 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.033 mm | |
| Feed fz for copy milling in steel < 900 N/mm2 | 0.037 mm | |
| Colour ring | without | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207155 6 | |
| EAN / GTIN | 4045197126566 | |
| Manufacturer number | 207155 6 |
Application Table
N
350
N
250
P
130
P
80
P
70
H
50
M
80
M
70
K
120
N
320
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide ball nose slot drill 6 mm
on request
In stock
322 pieces in stock
€33.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
264 pieces in stock
€84.18
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
€90.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
430 pieces in stock
€32.32
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | 0.5×D for side milling ;0.05×D for copy milling | 0.5×D for side milling ;0.03×D for copy milling | 0.2×D for side milling ;0.05×D for copy milling | Full slot cutting depth 1×D ;0.05×D for copy milling |
| Colour ring | without | without | red | without |
| Overall length L | 100 | 100 | 100 | 100 |
| Norm | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Radius R | 3 | 3 | 3 | 3 |
| Helix angle | 30 | 30 | 30 | 30 |
| No. of teeth Z | 2 | 2 | 2 | 2 |