{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide torus cutter, DLC, ⌀ h6 DC / R1: 20/3,0mm
Article no.: 206250 20/3,0
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.3×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Flute length Lc | 32 mm | |
| Corner radius R1 | 3 mm | |
| Overhang length L1 incl. recess | 98 mm | |
| Recess ⌀ D1 | 19 mm | |
| Overall length L | 150 mm | |
| Shank ⌀ Ds | 20 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.12 mm | |
| Feed fz for copy milling in short-chipping aluminium | 0.13 mm | |
| Shank tolerance | h6 | |
| Colour ring | yellow | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 206250 20/3,0 | |
| EAN / GTIN | 4045197860590 | |
| Manufacturer number | 206250 20/3,0 |
Application Table
N
280
N
260
N
240
N
120
N
100
N
120
N
90
N
80
N
110
N
100
N
90
N
80
N
90
N
180
N
100
N
120
Description
Version:
With the latest generation of DLC coating sp2.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Dimensions to manufacturer’s standard.
Tolerances:
R1 > 0.5 − 1.5 tolerance ±0.03.
R1 > 1.5 tolerance ±0.05.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Dimensions to manufacturer’s standard.
Tolerances:
- Corner radius
R1 > 0.5 − 1.5 tolerance ±0.03.
R1 > 1.5 tolerance ±0.05.
Note:
NEW GENERATION AVAILABLE! Recommended successor product is No. 206261.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide torus cutter, DLC, ⌀ h6 DC / R1: 20/3,0mm
on request
Subsequent delivery
0 pieces in stock
€615.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
19 pieces in stock
€328.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2 pieces in stock
€377.20
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 98 mm | 52 mm | 52 mm |
| Coating | DLC | uncoated | DLC |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.3×D for side milling | 0.05×D for copy milling; 0.5×D for side milling | 0.05×D for copy milling; 0.5×D for side milling |
| Recess ⌀ D1 | 19 mm | 19 mm | 19 mm |
| Through-coolant | no | no | no |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Corner radius R1 | 3 mm | 3 mm | 3 mm |