{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide torus cutter R1 0.05 0,5X6 mm
Article no.: 206041 0,5X6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: 0 / −0.005
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 0.5 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | 0 / −0.005 | |
| No. of teeth Z | 2 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h5 | |
| Through-coolant | no | |
| Flute length Lc | 0.5 mm | |
| Corner radius R1 | 0.05 mm | |
| Overhang length L1 incl. recess | 6 mm | |
| Recess ⌀ D1 | 0.48 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed fz for side milling in cast aluminium | 0.016 mm | |
| Feed fz for copy milling in cast aluminium | 0.016 mm | |
| Correction factor ap corr | 0.35 | |
| Colour ring | yellow | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 206041 0,5X6 | |
| EAN / GTIN | 4045197913623 | |
| Manufacturer number | 206041 0,5X6 |
Application Table
N
480
N
400
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
160
N
200
Description
Version:
With advanced DLC sp2 coating. For the highest demands regarding performance and precision in aluminium materials. Extremely tight tolerances ensure maximum accuracy. Double-relief ground with 2 chamfers hollow ground.
Recess angle α = 16°.
Tolerances:
Recess angle α = 16°.
Tolerances:
- Corner radius: R1 = ±0.0025 mm.
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
slots milled from solid: ap = 0.25×D × ap korr
side milling: ap = 0.50×D×ap korr
copying: ap = 0.25 × D × ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Values for:
slots milled from solid: ap = 0.25×D × ap korr
side milling: ap = 0.50×D×ap korr
copying: ap = 0.25 × D × ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z