{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill HPC, TiAlN, ⌀ d11 DC: 20mm
Article no.: 205492 20
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: HR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 38 mm | |
| Overall length L | 104 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.1 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.12 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205492 20 | |
| EAN / GTIN | 4045197546142 | |
| Manufacturer number | 205492 20 |
Application Table
N
270
N
190
P
115
P
100
P
95
P
65
P
55
M
55
K
85
Description
Version:
Dimensions similar to DIN 6527.
For high feed rates, very high metal removal rate.
Without dynamic twist pitch.
Size 16M MID mills: Dimensions to manufacturer’s standard.
For high feed rates, very high metal removal rate.
Without dynamic twist pitch.
Size 16M MID mills: Dimensions to manufacturer’s standard.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product No. 205706.
Recommended successor product No. 205706.