{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill HPC, uncoated, ⌀ e8 DC: 10mm
Article no.: 205260 10
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: WR
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 22 mm | |
| Overhang length L1 incl. recess | 30 mm | |
| Recess ⌀ D1 | 9.5 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner rounding rv | 0.32 mm | |
| Feed fz for slot milling in short-chipping aluminium | 0.12 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.14 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205260 10 | |
| EAN / GTIN | 4062406122478 | |
| Manufacturer number | 205260 10 |
Application Table
N
300
N
280
N
200
N
120
N
100
N
80
N
100
Description
Version:
For roughing.
Special profile for machining non-ferrous metals.
Special profile for machining non-ferrous metals.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||
|---|---|---|---|---|---|---|---|
Solid carbide roughing end mill HPC, uncoated, ⌀ e8 DC: 10mm
on request
In stock
135 pieces in stock
76,13 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
86 pieces in stock
66,01 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
108 pieces in stock
94,99 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
92 pieces in stock
139,15 €
plus VAT at the current rate
Prices plus delivery costs
|
GARANT Master Titan solid carbide milling cutter with more chip separators TPC, TiAlN, ⌀ e8 DC: 10mm
on request
In stock
20 pieces in stock
112,24 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
273 pieces in stock
128,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
96 pieces in stock
153,53 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 30 mm | 32 mm | 32 mm | 32 mm | 30 mm | 30 mm | 30 mm |
| Coating | uncoated | uncoated | DLC | TiAlN | TiAlN | DLC | DLC |
| Colour ring | yellow | yellow | yellow | pink | pink | yellow | yellow |
| Through-coolant | no | no | no | no | no | no | yes |
| Tool material | Solid carbide | Solid carbide | solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 45 degrees | 30 degrees | 30 degrees | 40 degrees | 40 degrees | 35 degrees | 35 degrees |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |