{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 3 mm
Article no.: 203617 3
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.1×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 6 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.016 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203617 3 | |
| EAN / GTIN | 4045197958488 | |
| Manufacturer number | 203617 3 |
Application Table
P
160
P
140
P
120
P
110
P
100
H
70
H
60
Description
Version:
For finishing operations. Special geometry for optimum chip evacuation. For profile milling as a finishing operation. Very sturdy version with strengthened core.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide milling cutter 3 mm
on request
In stock
273 pieces in stock
€25.88
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
331 pieces in stock
€105.34
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
225 pieces in stock
€49.91
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | 0.1×D for side milling | 0.05×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D |
| Colour ring | without | red | yellow |
| Through-coolant | no | no | no |
| Tolerance nominal ⌀ | h10 | 0 / -0.02 | e8 |
| No. of teeth Z | 6 | 6 | 3 |
| Shank ⌀ Ds | 6 | 6 | 6 |
| Type of product | End / face mill | End / face mill | End / face mill |