{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill 10 mm
Article no.: 203240 10
Article code:
- Tool material: Solid carbide
- Norm: DIN 6527
- Type: H
- Tolerance nominal ⌀: h10
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Norm | DIN 6527 | |
| Type | H | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 6 | |
| Helix angle | 50 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 55 HRC | 0.038 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203240 10 | |
| EAN / GTIN | 4045197119001 | |
| Manufacturer number | 203240 10 |
Application Table
P
160
P
95
P
85
H
75
H
65
H
50
H
30
Description
Version:
Strengthened core and geometry for hard machining, without dynamic helical pitch.
Application:
For profile milling as finishing.
(Plunge cutting only to shallow depths).
(Plunge cutting only to shallow depths).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide end mill 10 mm
on request
In stock
203 pieces in stock
€68.31
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
881 pieces in stock
€128.23
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
85 pieces in stock
€61.87
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | TiAlN |
| Colour ring | red | red | red |
| Overall length L | 72 | 72 | 72 |
| Through-coolant | no | no | no |
| Norm | DIN 6527 | DIN 6527 | DIN 6527 |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Direction of infeed | horizontal and oblique | horizontal and oblique | horizontal and oblique |