{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 20 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 4 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 41 mm | |
Overall length L | 104 mm | |
Shank ⌀ Ds | 20 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.085 mm | |
Feed fz for side milling in short-chipping aluminium | 0.15 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202515 20 | |
EAN / GTIN | 4045197588579 | |
Manufacturer number | 202515 20 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Solid carbide milling cutter, DLC, ⌀ DC: 20mm
on request
In stock
16 pieces in stock
€424.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2 pieces in stock
€297.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
€224.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
90 pieces in stock
€233.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
61 pieces in stock
€135.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
49 pieces in stock
€410.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
18 pieces in stock
€330.05
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Overall length L | 104 mm | 104 mm | 104 mm | 104 mm | 104 mm | 104 mm | 104 mm |
Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
Flute length Lc | 41 mm | 41 mm | 41 mm | 38 mm | 38 mm | 41 mm | 41 mm |
Tolerance nominal ⌀ | e8 | h6 | e8 | e8 | e8 | h6 | h6 |