{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 16 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HB to h6 | |
Through-coolant | no | |
Flute length Lc | 32 mm | |
Overall length L | 92 mm | |
Shank ⌀ Ds | 16 mm | |
Shank form | HB | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0.08 mm | |
Feed fz for side milling in steel < 750 N/mm2 | 0.13 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 202307 16 | |
EAN / GTIN | 4045197931733 | |
Manufacturer number | 202307 16 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Solid carbide milling cutter, uncoated, ⌀ e8 DC: 16mm
on request
In stock
76 pieces in stock
€85.56
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
53 pieces in stock
€198.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
31 pieces in stock
€276.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
284 pieces in stock
€133.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
195 pieces in stock
€147.78
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
96 pieces in stock
€269.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
€216.78
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | uncoated | DLC | TiAlN | AlCrN | DLC | uncoated |
Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Colour ring | without | yellow | yellow | yellow | without | yellow | yellow |
Shank | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
No. of teeth Z | 3 | 4 | 4 | 4 | 3 | 4 | 4 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |