{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter MTC, DLC, ⌀ h6 DC: 6mm
Article no.: 202273 6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 13 mm | |
| Overhang length L1 incl. recess | 24 mm | |
| Recess ⌀ D1 | 5.7 mm | |
| Overall length L | 62 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank form | HA | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.025 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.03 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202273 6 | |
| EAN / GTIN | 4045197854827 | |
| Manufacturer number | 202273 6 |
Application Table
N
480
N
440
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
With the latest generation of DLC coating sp2.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Without 45° cutting edge chamfer.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Without 45° cutting edge chamfer.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide milling cutter MTC, DLC, ⌀ h6 DC: 6mm
on request
In stock
88 pieces in stock
€57.73
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
53 pieces in stock
€50.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
€50.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
338 pieces in stock
€35.42
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | yellow | yellow | yellow | yellow |
| Recess ⌀ D1 | 5.7 mm | 5.7 mm | 5.7 mm | 5.5 mm |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Helix angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
| Tolerance nominal ⌀ | h6 | h6 | h6 | e8 |
| Type | W | W | W | W |
| No. of teeth Z | 3 | 3 | 3 | 3 |