{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 12 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | HB with h6 | |
Through-coolant | no | |
Flute length Lc | 15 mm | |
Overall length L | 60 mm | |
Shank ⌀ Ds | 12 mm | |
Shank form | HB | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0.07 mm | |
Feed fz for side milling in steel < 750 N/mm2 | 0.1 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 202266 12 | |
EAN / GTIN | 4045197864888 | |
Manufacturer number | 202266 12 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Solid carbide mini milling cutter, uncoated, ⌀ e8 DC: 12mm
on request
In stock
134 pieces in stock
€44.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
€106.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
94 pieces in stock
€46.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
236 pieces in stock
€56.01
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
127 pieces in stock
€63.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
€136.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
63 pieces in stock
€66.93
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | DLC | uncoated | AlCrN | AlCrN | AlCrN | TiAlN |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Through-coolant | no | no | no | no | no | no | no |
Tolerance nominal ⌀ | e8 | e8 | h10 | e8 | e8 | f8 | e8 |
No. of teeth Z | 3 | 2 | 2 | 3 | 3 | 3 | 3 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |