{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide mini milling cutter, uncoated, ⌀ e8 DC: 16mm
Article no.: 202262 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | HB with h6 | |
| Through-coolant | no | |
| Flute length Lc | 18 mm | |
| Overall length L | 65 mm | |
| Shank ⌀ Ds | 16 mm | |
| Shank form | HB | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.08 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.13 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202262 16 | |
| EAN / GTIN | 4045197864246 | |
| Manufacturer number | 202262 16 |
Application Table
N
170
N
140
N
100
P
70
P
60
P
45
M
40
K
55
Description
Version:
Shank similar to DIN 6535 HB.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide mini milling cutter, uncoated, ⌀ e8 DC: 16mm
on request
In stock
76 pieces in stock
75,44 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
120 pieces in stock
89,93 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
116 pieces in stock
108,79 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
106,49 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without | green |
| Through-coolant | no | no | no | no |
| Standard | Manufacturer’s standard | Manufacturer’s standard | DIN 6527 | Manufacturer’s standard |
| Shank | HB with h6 | HB with h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 |
| Flute length Lc | 18 mm | 18 mm | 22 mm | 18 mm |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 16 mm | 16 mm | 16 mm | 16 mm |