{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter HPC 3 mm
Article no.: 202251 3
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: f8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | ZOX | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 5 mm | |
| Overhang length L1 incl. recess | 18 mm | |
| Recess ⌀ D1 | 2.7 mm | |
| Overall length L | 80 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.035 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.045 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202251 3 | |
| EAN / GTIN | 4045197538543 | |
| Manufacturer number | 202251 3 |
Application Table
N
250
N
240
N
120
N
120
Description
Version:
Sturdy roughing end mill without knuckle profile.
With strong core, special chip breaker recesses and large polished flutes.
With strong core, special chip breaker recesses and large polished flutes.
Application:
For roughing milling with high demands on the component surface.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product is No. 202017.
Recommended successor product is No. 202017.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide milling cutter HPC 3 mm
on request
In stock
287 pieces in stock
€82.57
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
449 pieces in stock
€66.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
190 pieces in stock
€66.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
93 pieces in stock
€52.21
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 18 | 12 | 10 | 12 |
| Coating | ZOX | ZOX | ZOX | AlCrN |
| Overall length L | 80 | 57 | 57 | 50 |
| Helix angle characteristic | unequal spacing | unequal spacing | unequal spacing | unequal spacing |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Corner chamfer width at 45° | 0.1 | 0.1 | 0.1 | 0.08 |
| Shank ⌀ Ds | 6 | 6 | 6 | 6 |