{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter MTC, uncoated, ⌀ DC: 20mm
Article no.: 202244 20
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 41 mm | |
| Overhang length L1 incl. recess | 52 mm | |
| Recess ⌀ D1 | 19 mm | |
| Overall length L | 104 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank form | HB | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.085 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.12 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202244 20 | |
| EAN / GTIN | 4045197538536 | |
| Manufacturer number | 202244 20 |
Application Table
N
190
N
150
N
120
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Without 45º corner chamfer.
Without 45º corner chamfer.
Size 1–2 – tolerance: Size nominal ⌀ DC = e8.
Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.
Without 45º corner chamfer.
Without 45º corner chamfer.
Size 1–2 – tolerance: Size nominal ⌀ DC = e8.
Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
NEW GENERATION AVAILABLE! Recommended successor product is No. 202002.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter MTC, uncoated, ⌀ DC: 20mm
on request
In stock
80 pieces in stock
€313.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
€488.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
66 pieces in stock
€313.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
103 pieces in stock
€349.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
138 pieces in stock
€349.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
€432.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
€432.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
€201.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
46 pieces in stock
€402.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
€315.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
€377.20
plus VAT at the current rate
Prices plus delivery costs
|
|
| Through-coolant | no | no | no | no | no | no | no | no | no | no | no |
| Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
| Flute length Lc | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 40 mm | 41 mm | 41 mm | 41 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 45 degrees | 20 degrees | 45 degrees | 45 degrees | 45 degrees | 20 degrees | 20 degrees | 45 degrees | 45 degrees | 42 degrees | 42 degrees |
| Type | W | W | W | W | W | W | W | W | W | W | W |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |