{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter MTC, uncoated, ⌀ DC: 6mm
Article no.: 202243 6
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 13 mm | |
| Overhang length L1 incl. recess | 19 mm | |
| Recess ⌀ D1 | 5.7 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.025 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.03 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202243 6 | |
| EAN / GTIN | 4045197537478 | |
| Manufacturer number | 202243 6 |
Application Table
N
190
N
150
N
120
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Lengths similar to DIN 6527 long.
Lengths similar to DIN 6527 long.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter MTC, uncoated, ⌀ DC: 6mm
on request
In stock
305 pieces in stock
€42.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1 198 pieces in stock
€56.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
251 pieces in stock
€24.38
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
158 pieces in stock
€92.23
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
482 pieces in stock
€42.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
262 pieces in stock
€53.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
529 pieces in stock
€53.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
353 pieces in stock
€30.13
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
€57.73
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
219 pieces in stock
€50.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
€60.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
€55.66
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | DLC | uncoated | DLC | uncoated | DLC | DLC | uncoated | DLC | uncoated | uncoated | DLC |
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 90 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees | 90 degrees |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0,25×D ved beskæring | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling |
| Through-coolant | no | no | no | no | no | no | no | no | no | no | no | no |
| Flute length Lc | 13 mm | 13 mm | 13 mm | 16 mm | 13 mm | 13 mm | 13 mm | 12 mm | 13 mm | 13 mm | 13 mm | 13 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |