{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 1.5 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 2 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 4 mm | |
Overall length L | 50 mm | |
Shank ⌀ Ds | 3 mm | |
Shank form | HA | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0.005 mm | |
Feed fz for side milling in steel < 900 N/mm2 | 0.006 mm | |
Correction factor for vc | 1.25 | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 201630 1,5 | |
EAN / GTIN | 4045197264138 | |
Manufacturer number | 201630 1,5 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
Solid carbide slot drill, TiAlN, ⌀ DC: 1,5mm
on request
In stock
287 pieces in stock
€28.98
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
445 pieces in stock
€24.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
287 pieces in stock
€31.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
208 pieces in stock
€31.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
360 pieces in stock
€18.17
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | TiAlN | AlCrN | AlCrN | AlCrN | uncoated |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling |
Overall length L | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm |
Through-coolant | no | no | no | no | no |
Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
Type | N | N | N | N | N |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |