{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Mini milling cutter HSS-Co8, uncoated, ⌀ e8 DC: 12mm
Article no.: 191360 12
Article code:
- Tool material: HSS Co 8
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | HB with h6 | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.04 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191360 12 | |
| EAN / GTIN | 4045197102171 | |
| Manufacturer number | 191360 12 |
Application Table
N
83
P
30
P
25
P
25
N
55
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground. Shank similar to DIN 1835 B with shank tolerance h6. General-purpose cutting edge geometry. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
Eccentric relief ground. Shank similar to DIN 1835 B with shank tolerance h6. General-purpose cutting edge geometry. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
Note:
Save the regrinding costs: it is cheaper to use a mini slot drill to the limit of wear and throw it away, than to regrind it.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Mini milling cutter HSS-Co8, uncoated, ⌀ e8 DC: 12mm
on request
In stock
85 pieces in stock
€19.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
156 pieces in stock
€37.84
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
73 pieces in stock
€86.48
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
160 pieces in stock
€43.82
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 58 mm | 110 mm | 110 mm | 58 mm |
| Shank | HB with h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | HB with h6 |
| Cutting edge ⌀ DC | 12 mm | 12 mm | 12 mm | 12 mm |
| Tolerance nominal ⌀ | e8 | e8 | e8 | e8 |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.04 mm | 0.024 mm | 0.024 mm | 0.04 mm |
| No. of teeth Z | 3 | 3 | 3 | 3 |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm | 12 mm |