{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Re-adjustable hand reamer, Nominal ⌀ DC: 4mm
Article no.: 160500 4
Copy
Article code:
Copy
- Tool material: HSS
- Standard: DIN 859
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 4 mm | |
| Tool material | HSS | |
| Standard | DIN 859 | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 24 mm | |
| Overhang L1 | 48 mm | |
| Overall length L | 76 mm | |
| Shank square □ | 3.15 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification & Classification
| Article number |
160500 4
Copy |
|
| EAN / GTIN |
4045197250605
Copy |
|
| Manufacturer number |
160500 4
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
suitable for / [m/min]
P
ISO code:
suitable for / [m/min]
P
ISO code:
suitable for / [m/min]
P
ISO code:
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Up to 5 mm with straight flutes; from 6 mm with left hand helix 7 − 8°. The reamer body is slit and can be adjusted by approx. 1/100 of the reamer ⌀ using the expansion screw (e.g. 20 mm ⌀ = 0.2 mm).
Application:
For opening through holes to a slight oversize. Use the straight fluted reamers only in holes which are not interrupted. Make sure that the screw is not left tightened when stored.