{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7 16 mm
Article no.: 160150 16
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 16 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 87 mm | |
| Overhang L1 | 107 mm | |
| Overall length L | 175 mm | |
| Number of cutting edges Z | 8 | |
| Shank square □ | 12.5 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 16 | |
| EAN / GTIN | 4045197937308 | |
| Manufacturer number | 160150 16 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Hand reamer H7 16 mm
on request
In stock
214 pieces in stock
77,51 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
44 pieces in stock
153,53 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without |
| Overall length L | 175 | 170 |
| Nominal ⌀ DC | 16 | 16 |
| Standard | DIN 206 B | DIN 8093 |
| Flute length Lc | 87 | 52 |
| Tolerance | H7 | H7 |
| Application for type of drilling | for through hole | for through holes |