{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Fluteless machine tap with oil grooves HSS-E-PM Form E 6HX, TiAlN, M: M12
Article no.: 139198 M12
Article code:
- Gewindeart: M
- Flank angle: 60
- Schneidstoff: HSS E PM
- Standard: DIN 2174
- Thread standard: DIN 13
Product details
Technical Data
| Gewindegröße | M12 | |
| Beschichtung | TiAlN | |
| Gewindeart | M | |
| Flank angle | 60 degrees | |
| Schneidstoff | HSS E PM | |
| Standard | DIN 2174 | |
| Thread standard | DIN 13 | |
| Toleranzklasse | ISO 2X 6HX | |
| Taper lead form | E | |
| Schaft | Plain shank with h9 | |
| Innenkühlung | no | |
| Application for type of drilling | up to 3×D for blind holes; up to 3×D for through holes | |
| Schneidrichtung | right-hand | |
| Gewindesteigung | 1.75 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 9 mm | |
| Shank square □ | 7 mm | |
| Tapping hole ⌀ guide value | 11.2 mm | |
| Thread ⌀ | 12 mm | |
| Number of clamping slots | 8 | |
| Colour ring | without | |
| Number of cutting edges Z | 8 | |
| Thread depth | 36 mm | |
| Series | GARANT Master | |
| Type of product | Fluteless tap |
Identification & Classification
| Article number | 139198 M12 | |
| EAN / GTIN | 4062406383442 | |
| Manufacturer number | 139198 M12 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
38
P
37
P
35
P
27
P
18
P
12
M
12
M
7
N
22
Description
Version:
DIN 2174 (≈ DIN 371 ≤ M10; ≈ DIN 376 ≥ M12).
Tolerance class: ISO 2X/6HX.
The latest generation of high-performance fluteless taps, specially developed for use in steel materials.
Form E (lead-in 1.5 − 2 turns) for deep threads with short run-out. The thread is tapped almost to the bottom of the hole.
Tolerance class: ISO 2X/6HX.
The latest generation of high-performance fluteless taps, specially developed for use in steel materials.
- Optimised polygon geometry for a lower torque.
- Multi-layer HIPIMS coating for high wear resistance.
- HSS-E-PM substrate for exceptional process reliability.
Form E (lead-in 1.5 − 2 turns) for deep threads with short run-out. The thread is tapped almost to the bottom of the hole.