{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 131125 M10
Machine tap for synchronised spindles HSS-E-PM internal cooling M10
Article no.: 131128 M10
Article code:
Click to enlarge image
Click to enlarge image
The spiral point evacuates the swarf in the cutting direction.
Click to enlarge image
Click to enlarge image
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: Manufacturer’s standard
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M10 | |
| Coating | DLC | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | Manufacturer’s standard | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | B | |
| Shank | DIN 1835 B with h6 | |
| Through-coolant | yes | |
| Application for type of drilling | up to 2.5×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.5 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank square □ | 8 mm | |
| Tapping hole ⌀ | 8.5 mm | |
| Thread ⌀ | 10 mm | |
| Shank tolerance | h6 | |
| Type of threading tool | Machine tap for synchronous machining | |
| Number of clamping slots | 3 | |
| Colour ring | yellow | |
| Number of cutting edges Z | 3 | |
| Thread depth | 25 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 131128 M10 | |
| Manufacturer number | 131128 M10 |
Application Table
N
30
N
30
N
25
N
25
N
5
N
15
N
25
N
55
N
35
N
6
N
4
Description
Version:
Sturdy design with spiral point and shank to DIN 1835-B.Special geometry for use on machines with synchronised spindle drives. Guidance is provided by the synchronising spindle of the machine.
With the latest generation of special DLC coating sp2 for optimum tool life.
For use with emulsion (fat content minimum 8%).
With internal coolant supply for maximum tool life.
With the latest generation of special DLC coating sp2 for optimum tool life.
For use with emulsion (fat content minimum 8%).
With internal coolant supply for maximum tool life.