Al ToolScout
{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Plug-in ratchet 2-1/2 in
Número de artículo: 657630 2-1/2
Código del artículo:
- Exchangeable tool: Plug-in head
- Square drive: 1/2
- Material: Chrome vanadium steel
Detalles de producto
Datos técnicos
| Exchangeable tool | Plug-in head | |
| Square drive | 1/2 in | |
| Width b | 43 mm | |
| Height h | 29 mm | |
| Long-term rated loading | 340 Nm | |
| Pitch S | 25 mm | |
| No. of teeth | 52 | |
| Plug-in shank | 14×18 mm | |
| Material | Chrome vanadium steel | |
| Ratchet reversible | sí | |
| Ratchet with ejector | no | |
| Type of product | Ratchet |
Números de identificación y clasificaciones
| Número de artículo | 657630 2-1/2 | |
| EAN / GTIN | 4062406278359 | |
| Número del fabricante | 657630 2-1/2 |
Descripción
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Plug-in reversible ratchet.
Plug-in reversible ratchet.
Material:
Chrome vanadium steel, chrome-plated.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
Further plug-in heads with rectangular plug-in shank 22 × 28 mm available on request.
Further plug-in heads with rectangular plug-in shank 22 × 28 mm available on request.
Descargas y documentos
Comparar con productos similares
Este artículo |
Recomendaciones |
|
|---|---|---|
Plug-in ratchet 2-1/2 in |
||
| Square drive | 1/2 | 1/2 |
| Plug-in shank | 14×18 | 14×18 |
| Height h | 29 | 20.5 |
| Ratchet reversible | sí | sí |
| Material | Chrome vanadium steel | Chrome vanadium steel |
| Exchangeable tool | Plug-in head | Plug-in head |
| Type of product | Ratchet | Ratchet |