{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Special pull stud with internal thread 50
Número de artículo: 308740 50
Código del artículo:
Detalles de producto
Datos técnicos
| suitable for steep tapers | 50 | |
| Hole characteristics | with bore | |
| Collar ⌀ D | 39.3 mm | |
| Head ⌀ D1 | 32 mm | |
| Overall length L | 65 mm | |
| L1 | 25.1 mm | |
| Thread M | M24 | |
| Internal thread | M24 | |
| Internal thread depth | 17.5 mm | |
| maximum tightening torque | 150 Nm | |
| suitable for taper arbors with colour code | SK 50 | |
| Width across flats | 30 mm | |
| Type of product | Pull Stud |
Números de identificación y clasificaciones
| Número de artículo | 308740 50 | |
| EAN / GTIN | 4045197151070 | |
| Número del fabricante | 308740 50 |
Descripción
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also DIN 69871 / ISO 7388-1.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.