{{ name }}
Art.-nr. {{ combinedCodeWithHighlight }}
Sagsnummer:
EAN/GTIN:
Producentnummer:
HM-fræser, ubelagt, ⌀ e8 DC: 20mm
Art.-nr.: 202242 20
Sagsnummer:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Produktdetaljer
Teknisk data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 60 mm | |
| Overall length L | 126 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.085 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.12 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identifikationsnumre og klassifikationer
| Artikelnummer | 202242 20 | |
| EAN/GTIN | 4045197767172 | |
| Producentnummer | 202242 20 |
Anvendelsestabel
N
170
N
140
N
105
N
160
N
110
N
130
N
110
N
90
N
160
N
120
N
150
Betegnelse
Version:
Eccentric relief ground, additionally finish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Application:
For roughing and finishing.
Downloads og dokumenter
Sammenlign med lignende produkter
Denne artikel |
Anbefalinger |
|||||||
|---|---|---|---|---|---|---|---|---|
HM-fræser, ubelagt, ⌀ e8 DC: 20mm
på forespørgsel
Kan leveres med det samme
Kan leveres på 11-14 arbejdsdage
81 styk på lager
81 Kan leveres på 11-14 arbejdsdage
1.519,78 DKK
plus moms
plus fragt
|
på forespørgsel
Kan leveres med det samme
Kan leveres på 11-14 arbejdsdage
10 styk på lager
10 Kan leveres på 11-14 arbejdsdage
INR 2,264.84
plus moms
plus fragt
|
|||||||
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.03×D for copy milling; 0.1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
| Overall length L | 126 mm | 126 mm | 126 mm | 126 mm | 126 mm | 126 mm | 126 mm | 126 mm |
| Through-coolant | no | no | no | no | no | no | no | no |
| Standard | Manufacturer’s standard | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 | DIN 6527 | Manufacturer’s standard | Manufacturer’s standard |
| Helix angle | 45 degrees | 45 degrees | 45 degrees | 35 degrees | 45 degrees | 45 degrees | 42 grader | 42 degrees |
| Type | W | W | W | N | W | W | N | W |
| Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |