{{ name }}
Artiklové číslo {{ combinedCodeWithHighlight }}
Vaše materiálové číslo:
EAN / GTIN:
Číslo výrobce:
Miniature cup brush TBU dia. 18 mm shank dia. 3 mm steel wire dia. 0.10
Artiklové číslo: 4007220033296
Vaše materiálové číslo:
Upozorňujeme na prodlouženou dodací lhůtu a omezené poradenství:
Tuto položku pro vás objednáváme přímo u výrobce, protože není součástí našeho hlavního sortimentu, a proto ji nemáme skladem.
InformaceÚdaje o výrobku
Technické údaje
| Druh produktu | Hrncový kartáč |
Identifikační čísla a klasifikace
| Katalogové číslo | 4007220033296 | |
| EAN / GTIN | 4007220033296 | |
| Číslo výrobce | 43209451 | |
| L-číslo | L51510 632 |
Popis
Opis:
Suitable for light brushing such as deburring, cleaning and polishing. Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece. PFERD offers a wide range of miniature brushes for precision work. These can be used on flexible shaft drives, micro motors or electric grinders. Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire withstands temperatures up to 300 °C.
Cecha szcz.:
- RPM, max.: 18000 RPM
- RPM, optimum, from: 5000 RPM
- RPM, optimum, to: 10000 RPM
- Width, metric: 3 mm
- Mounting system: Shank
- Dia. cup: 10 mm
- Dia. filament material: 0.1 mm
- Dia. external, metric: 18 mm
- Dia. shank, metric: 3 mm
- Filament material: Steel wire (ST)
- Length, filament: 6 mm
- Length, total: 45 mm
Zaleta:
- Maximum precision and efficiency in work on delicate workpieces.
- Highly flexible, enabling optimal adjustment to the workpiece contour.
- Long tool life through use of PFERD special wire.
- Creates fine surfaces.
Zastosowanie:
- Recommendations for use: Please observe the recommended rotational speeds.
- Applications: Cleaning; Deburring; Derusting; Removing oxide layers; Paint stripping; Roughening
- Drive types: Flexible shaft drive; Straight grinder
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Thermosetting plastics
- Elastomers
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Wood
- Materials that can be worked: Cast iron; Cast steel; Thermosetting plastics; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Wood
Wskazówka:
- When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.