Punta a inserti KOMET KUB Trigon® Codolo combinato 30 mm

Codice art.: 236630 30
più IVA all’aliquota corrente Prezzo più spese di spedizione
su richiesta
Disponibile a magazzino
3 pezzi in magazzino

Seleziona la variante e la quantità

⌀ DC (mm) Prezzo unitario IVA incl.
  • Profondità di foratura per punta a inserti fino a: 3×D
  • Codolo: DIN 6535 HE, DIN 6595
  • Utilizzo foro: Centratura; per foratura trasversale; Foratura obliqua; per foratura trasversale; Conca; Uscita obliqua; Foratura obliqua
  • Passaggio interno per LR: sì

Aggiungi alla lista articoli

    Condividi questo prodotto

    o copia questo link

    Dettagli prodotto

    Dati tecnici

    Series KUB Trigon®
    Nominal ⌀ D 30
    Profondità di foratura per punta a inserti fino a 3×D
    Codolo DIN 6535 HE, DIN 6595
    Utilizzo foro Centratura; per foratura trasversale; Foratura obliqua; per foratura trasversale; Conca; Uscita obliqua; Foratura obliqua
    Passaggio interno per LR
    Reach L1 90 mm
    Overhang LA 119 mm
    Shank ⌀ Ds 32 mm
    Shank length Ls 60 mm
    achievable maximum ⌀ offset 32.5 mm
    Maximum adjustment limit Vmax 1.25 mm
    ISO code indexable insert WOEX 05T304 24-...
    Pack of insert screws 239652 8IP2 (1.3 Nm)
    Number of cutting edges Z 1
    Tipo di prodotto Punta a inserti

    Codice articolo e classificazioni

    Codice articolo 236630 30
    EAN / GTIN 4047109100497
    Codice del produttore V45 73002

    Descrizione

    Version:

    • Offset-axis drilling: dependent on ⌀ up to 1.5 mm.
    • Special manufacturing procedure for extremely large flutes with very high rigidity.
    • Specific positioning of the indexable inserts for bores free of withdrawal marks and with precise dimensional stability (± 0.1 mm as a rule).
    • Internal coolant supply is directed to the cutting edges (sophisticated geometry, ideal for minimum lubrication).
    • 3 − 10 bar coolant pressure is sufficient.
    • For stationary and rotating applications.

    Application:

    With indexable inserts No. 236740237080.

    Supplied with:

    Clamp screws (without indexable inserts).

    Note:

    • Note! A disc falls off when the drill exits. Risk of injury if the component is rotating! Please take safety precautions.
    • On request − left-hand cutting; − 2×D, − other ⌀; − special types − torsional vibration damper for ABS giving low-vibration machining, with maximum tool life and minimum noise level.

    Download & documenti

    Prodotti correlati

    Ricambi

    Inserti

    Servizi & Consulenza prodotti

    Acquisto veloce

    Accedi al tuo account

    Nel carrello

    Al carrello
    Al carrello