Corpo base HiPer-Drill 13 mm

Codice art.: 231620 13
più IVA all’aliquota corrente Prezzo più spese di spedizione
su richiesta
Disponibile a magazzino
6 pezzi in magazzino

Seleziona la variante e la quantità

⌀ DC (mm) Prezzo unitario IVA incl.
  • Esecuzione: 12×D
  • Codolo: ISO 9766
  • Utilizzo foro: per foratura trasversale; per foratura in pacchetti; per uscita obliqua; per foratura obliqua
  • Numero taglienti Z: 2
  • Passaggio interno per LR: sì

Aggiungi alla lista articoli

    Condividi questo prodotto

    o copia questo link

    Dettagli prodotto

    Dati tecnici

    Serie HiPer-Drill
    Esecuzione 12×D
    Codolo ISO 9766
    Utilizzo foro per foratura trasversale; per foratura in pacchetti; per uscita obliqua; per foratura obliqua
    Numero taglienti Z 2
    Passaggio interno per LR
    Campo di ⌀ Dc 13 mm - 13,49 mm
    Lunghezza utile L1 162 mm
    ⌀ Codolo Ds 16 mm
    Lunghezza codolo Ls 48 mm
    Vite di serraggio 231999 7IP (0,6 Nm)
    Lunghezza complessiva L 232 mm
    Tipo di prodotto Punta a inserti

    Codice articolo e classificazioni

    Codice articolo 231620 13
    EAN / GTIN 4045197687630
    Codice del produttore 231620 13

    Descrizione

    Version:

    • Very high feed rates and maximum performance due to optimally matched geometries and materials.
    • Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
    • High concentricity when assembled.
    • Shank support for optimum stability in operation.

    Polished flutes.

    Application:

    For stationary and rotating use. For holes up to IT9 accuracy.

    Note:

    Further sizes up to ⌀ 50.99 mm available on request.
    The insert screw must be replaced after every fifth change of cutter insert.
    Reduce feed rates f by 10 % and vc values by 40 %.
    For process reliability when using the drill, initial pilot drilling to 1.5×D with the drill No. 231600 with the same cutter insert size and type is necessary. The generation of a pilot hole improves process reliability.
    Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
    For optimum stability, clamp the drill so the overhang is as short as possible.
    For process reliability when using the drill, initial pilot drilling to 1.5×D with the drill No. 231600 with the same cutter insert size and type is necessary. The generation of a pilot hole improves process reliability.

    Download & documenti

    Confronta con articoli simili

    Questo articolo


    Raccomandazioni


    Corpo base HiPer-Drill  13 mm

    Corpo base HiPer-Drill 13 mm

    su richiesta
    Disponibile a magazzino
    6 pezzi in magazzino
    CHF  498.50
    più IVA all’aliquota corrente Prezzo più spese di spedizione
    su richiesta
    Disponibile a magazzino
    7 pezzi in magazzino
    539,35 €
    più IVA all’aliquota corrente Prezzo più spese di spedizione
    Dia. range Dc 13 ;13,49 13 ;17,5
    Number of cutting edges Z 2 2
    Version 12×D 12×D
    Shank ISO 9766 ISO 9766
    Shank ⌀ Ds 16 20
    Reach L1 162 156
    Type of product Punta a inserti Indexable drill

    Prodotti correlati

    Ricambi

    Inserti

    Servizi & Consulenza prodotti

    Acquisto veloce

    Accedi al tuo account

    Nel carrello

    Al carrello
    Al carrello