{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Pull stud, 18CrNiMo7 Form A 50
Réf.: 308605 50
Référence:
- Dragtapp norm: ISO 7388-3
Détails du produit
Caractéristiques techniques
| passar för konor | 50 | |
| Hålegenskap | med hål | |
| Dragtapp norm | ISO 7388-3 | |
| Kragdiameter D | 36 mm | |
| Huvud-⌀ D1 | 28 mm | |
| totallängd L | 74 mm | |
| L1 | 34 mm | |
| gängaM | M24 | |
| vinkel A | 15 grad | |
| max. åtdragningsmoment | 150 Nm | |
| passar för konor med färgkod | SK 50 | |
| nyckelvidd | 19 mm | |
| Produktslag | Dragtappar |
Numéros d’identification et classifications
| Référence article | 308605 50 | |
| EAN / GTIN | 4045197554536 | |
| Réf. fabricant | 308605 50 |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
ISO 7388-3 meets the old standard DIN 69872.
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
| Collar ⌀ D | 36 | 36 | 36 |
| Thread M | M24 | M24 | M24 |
| Head ⌀ D1 | 28 | 28 | 28 |
| maximum tightening torque | 150 | 150 | 150 |
| suitable for taper arbors with colour code | SK 50 | SK 50 | SK 50 |
| Angle A | 15 | 15 | 15 |
| Hole characteristics | med hål | with bore | with bore |