{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Plaquette de coupe pour rainurage avec chanfrein H7 10 mm
Réf.: 290363 10
Référence:
Détails du produit
Caractéristiques techniques
| pour largeur de rainure m | 10 mm | |
| Revêtement | TiN | |
| Pour ajustage | H7 | |
| Largeur de coupe w | 10,015 mm | |
| Profondeur de rainure t | 3,88 mm | |
| Épaisseur extrémité b | 14 mm | |
| Chanfrein | 0,2 mm × 45° | |
| Type d'outils | HSS | |
| Type de produit | Outil de rainurage et de mortaisage |
Numéros d’identification et classifications
| Référence article | 290363 10 | |
| EAN / GTIN | 4045197881465 | |
| Réf. fabricant | 290363 10 |
Tableau d’application
N
N
N
P
P
P
P
P
M
M
S
K
N
N
Description
Version:
With TiN coating.
Suitable for regrinding.
Suitable for regrinding.
Application:
For producing slots according to DIN 6885, DIN 138 and factory standards.
For slot widths with tolerance JS9, use cutter inserts with tolerance H7.
For slot widths with tolerance JS9, use cutter inserts with tolerance H7.
Note:
- Special sizes (slot widths) available on request.
- Detailed application values can be found in our application ToolScout.
From slot width 16 mm it is essential to perform two passes. The first pass must be performed for approx. half the slot width (e.g. 10 mm for a desired slot width of 18 mm). For the first pass it is recommended that a cutter insert without chamfer (290370 – 290379) is used, as this means greater slot depths are possible.