{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
- Angle d'attaque κ: 90
- Application de fraisage: Dressage; Fraisage circulaire; Ramping
- Pas des arêtes de coupe: Différent
- Arrosage interne: oui
- Méthode d'usinage: MTC
Détails du produit
Caractéristiques techniques
| Series | Softcut® | |
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 3 | |
| Type de queue | Queue cylindrique | |
| Angle d'attaque κ | 90 degré | |
| Application de fraisage | Dressage; Fraisage circulaire; Ramping | |
| Pas des arêtes de coupe | Différent | |
| Arrosage interne | oui | |
| Méthode d'usinage | MTC | |
| Changement d'outil | PowerCard | |
| Overhang L1 | 25 mm | |
| Overall length Ltot | 160 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| ⌀ D3 | 17 mm | |
| Circular interpolation milling ⌀ Dmin | 37 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Circular interpolation milling ap | 1.7 mm | |
| Ramping angle αmax | 1.19 degrees | |
| Ramping length L for αmax | 14.5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2,2 Nm) | |
| Type de produit | Fraise à dresser |
Numéros d’identification et classifications
| Référence article | 215565 20/3 | |
| EAN / GTIN | 4045197601582 | |
| Réf. fabricant | 215565 20/3 |
Description
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless steels.
Spare part:
Pack of insert screws No. 219826 (8IP; 2.2 Nm).